Brand: Strongboy
The Strongboy ® XL Prophead Masonry Support
SWL: 340Kg Max Height: 3m Max Spacing: 900mm
A HARD JOB MADE SIMPLE
Tackle tough masonry jobs with ease using the innovative STRONGBOY® XL Prophead masonry Support. This easy to use attachment for standard Builder or ACROW props simplifies the process of fitting Steel Beams, RSJs, Lintels and supporting brickwork while repairing walls. By allowing you to work freely on one side of the wall.
LESS MESS, FASTER JOB
Stronger and longer than the original The STRONGBOY® XL Prophead, masonry support will support a double or single skin, brick or block cavity wall up to 300mm, from either the inside or the outside of the building. This reduces the need for a cumbersome needles and props setup. It reduces the time required, the mess created and the effort needed to carry out your job. It also has a thicker plate.
MINIMISE DAMAGE AND REPAIR WORK
Because it fits between courses, you don't have to damage the brickwork above. Simply drill though the existing mortar and rake it out, or remove a brick beneath the level you wish to work and insert the Prohead support. Lock your Prop into position underneath it and you are ready to start.
COST EFFECTIVE AND EFFICENT
The STRONGBOY® XL Prophead, masonry support can effectively turn a two man job into a one man job. There are no unnecessary holes to make or needles & props to line up. Plus, easy access to the wall from the opposite side for working and less repair work, means you save Time and Money.
UNIQUE TO STRONGBOY
The STRONGBOY® XL Prophead Masonry Support boasts a unique patented feature unavailable on other Propheads and masonry supports. The patented plate retaining bar securely 'FIXES' the STRONGBOY XL to the ACROW PROP. This prevents slippage under load, keeps the load plate level by hooking over the top plate of the prop, reduces tilting and overtightening and improves stability – a feature not available on other Propheads and Masonry supports.
All Genuine Strongboy XLs are stamped with the Strongboy® logo (to ensure authenticity) and are also marked with the safe working load and insertion depth indicators.
The ergonomic handle makes it easy to carry.
TECHNICAL DETAILS
Safe working Load: 340Kg
Maximum Working Height: 3m
Maximum Prop spacing: 900mm (750mm recommended)
Please see our instructions for use.
IF IN DOUBT, PLEASE CONSULT YOUR STRUCTURAL ENGINEER.
Brand: Strongboy
Brand: Strongboy
check_circle
check_circle